• Simple, sturdy bike carrying system
• Fits most sedans, hatchbacks, minivans, and SUVs
• Single configuration design eliminates setup hassles and headaches during installation
• 12-inch long carry arms accommodate two bikes, and patented individual tie-down system secures and protects
• Lifetime warranty on materials and workmanship

Product Description
Deluxe Trunk Mounted 2-Bike CarrierAmazon.com Product Description
No roof rack, no problem with the 102DB Deluxe Two Bike Carrier from Allen Racks. This simple, sturdy bike carrying system fits most sedans, hatchbacks, minivans, and SUVs via a single configuration design that eliminates setup hassles and headaches during installation. The rack comes fully assembled, and mounts to your vehicle in seconds. Twelve-inch long carry arms easily accommodate up to two bikes, and a patented individual tie-down system secures and protects your bicycles. Also includes a manufacturer's lifetime warranty on workmanship and materials.

About Allen
About Allen Bike Racks
In 1967, after a few years of working on the aerospace technology for the Apollo missions, Dick Allen was out of a job. Government cutbacks led Allen, a Harvard-trained physicist, to transform his garage hobby into a new industry. A cycling enthusiast, inventor, and family man, Allen had a personal need for a bike-carrying device. On weekends, he would take his sons and wife to Cape Cod or the White Mountains of New Hampshire. What proved difficult time and again was the transport of his family's bicycles. Rather than fight through inconvenience with twine and a dinged car, Allen sought an answer for himself as well as a market in which he foresaw major growth possibilities.

Always a pathfinder, Allen took to work in his Lincoln, Massachusetts, garage in search of a more efficient way to transport bikes. Drafting designs during the day and constructing them throughout the night, he put together a model made of electrical conduit, metal strapping, and fire hose casings (for padding). At first, the Allens tested the prototype on weekend excursions. Finding the first trunk-mounted rack to be a success, Dick started Allen Bike Racks. Dealer acceptance came quickly, and by 1971 Allen Bike Racks were sold nationally through a number of major bicycle distributors. Today, the company owns more than three dozen patents and offers a versatile product line of bike racks while Dick's son Alex now owns and operates the business. What started out as a small garage run operation now operates three warehouses nationally, two factories abroad, and has products sold in more than a dozen countries around the world.

Price: $46.95
Rating: 4.0 (40 reviews)

• 1. Improves engine output by up to 15 % per adjustment
• 2. Enhances Nm, throttle response, acceleration and torque
• 3. Easy 20-minute installation
• 4. Performance level setting from 0 - 100 %
• 5. 10-year manufacturer warranty

Product Description
Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected bikes, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor by models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your bikes ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor.
This control panel helps to prevent and stop undesired restriction of the ECU.
Installation is easy and universal for each model.
1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter.
2. Find the oxygen sensor(s) in the exhaust.
3. Splice blue cables to O2 sensor's signal wire according to the following wiring table.
4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative.
Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www.carperformance.us

Price: $59.99
Rating: ( reviews)

• The Shifter is operated by your left foot, and either directly or through linkage, operates the Transmission to change gears on the bike.
• A used Shifter will be straight and operate properly. Slight cosmetic imperfections are considered normal wear.
• Sample Picture of Gear Shifter - Shift Pedal Shown, not necessarily the Gear Shifter - Shift Pedal for your bike. You will be shipped the correct part for a 2001 Yamaha YZF R6 R6

Product Description
2001 Yamaha YZF R6 R6 Gear Shifter - Shift Pedal

The Shifter is operated by your left foot, and either directly or through linkage, operates the Transmission to change gears on the bike. The Condition of this part is Used.

A used Shifter will be straight and operate properly. Slight cosmetic imperfections are considered normal wear.

Click here to see other parts for your motorcycle

Price:
Rating: ( reviews)

• 1. Improves engine output by up to 15 % per adjustment
• 2. Enhances Nm, throttle response, acceleration and torque
• 3. Easy 20-minute installation
• 4. Performance level setting from 0 - 100 %
• 5. 10-year manufacturer warranty

Product Description
Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected bikes, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor by models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your bikes ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor.
This control panel helps to prevent and stop undesired restriction of the ECU.
Installation is easy and universal for each model.
1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter.
2. Find the oxygen sensor(s) in the exhaust.
3. Splice blue cables to O2 sensor's signal wire according to the following wiring table.
4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative.
Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www.carperformance.us

Price: $59.99
Rating: ( reviews)

• P11420024
• New Arrivals
• New Arrivals / Misc.

Product Description
Photo`s are for reference only. Please read item title carefully.

Price: $89.48
Rating: ( reviews)

• A complete system for scratch removal and surface restoration
• For plastic, acrylic and fiberglass
• Three separate plastic polishing formulas
• Includes non-abrasive polishing cloth

Product Description
A complete system for scratch removal and surface restoration of plastic, acrylic and fiberglass. Plastic polish #1 cleans, shines and protects all plastic surfaces. Plastic Polish #2 removes fine scratches and haziness. Plastic polish #3 removes heavy scratches and prepares the surface for the #2 formula Includes a non-abrasive polishing cloth. 8 oz. bottles (USA) (7100)

Price: $17.40
Rating: 4.0 (33 reviews)

• Filters are washable and reusable, and will protect your engine for the life of your vehicle.
• Lasts up to 50,000 miles before cleaning is required depending on driving conditions.
• High Air Flow with Excellent Filtration
• Designed to Increase Horsepower and Acceleration
• 10 Year / Million Mile Limited Warranty - Will not Void Vehicle Warranty.

Product Description
KN Performance Factory Fit Air Filters are designed to achieve high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life. The secret to their success lies in the unique characteristics of their filter medium that was originally developed by K&N years ago in the dust, sweat and tears of desert motocross racing. They just wanted to win races and stumbled on a cotton filtration technology destined to be the best. Their high flow cotton gauze air filter is washable, reusable and built to last for the life of an engine. The filters consist of four to six sheets of cotton gauze layered between two sheets of aluminum wire mesh. This media is then pleated and oiled to enhance its filtering capabilities and overall performance. The result is an air filter that allows dramatically more air into an engine, is washable and reusable, and will protect your engine for the life of your vehicle.

Price: $45.95
Rating: ( reviews)

• Part # 54-6986

Product Description
DFY Sports Yamaha Stylized YZ Short Sleeve T-Shirt (2 Pack) Black Small S

Price: $35.91
Rating: ( reviews)

• 1. Improves engine output by up to 15 % per adjustment
• 2. Enhances Nm, throttle response, acceleration and torque
• 3. Easy 20-minute installation
• 4. Performance level setting from 0 - 100 %
• 5. 10-year manufacturer warranty

Product Description
Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected jet skis, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor by models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your Jet's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor.
This control panel helps to prevent and stop undesired restriction of the ECU.
Installation is easy and universal for each model.
1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter.
2. Find the oxygen sensor(s) in the exhaust.
3. Splice blue cables to O2 sensor's signal wire according to the following wiring table.
4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative.
Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www.carperformance.us

Price: $59.99
Rating: ( reviews)